Contact Us

Please leave us a comment or question here.

We are looking for hearing from you!

If you wish to subscribe our news and updates, please go to Newsletter subscription page on the bottom of this web page. Thank you!

4911 Busbee Rd.
Seagrove, NC 27341
USA

Studio Touya is a handmade pottery studio located in Seagrove NC where Hitomi and Takuro Shibata set up studio and built Japanese style wood kiln. Our focus is to make simple& functional pottery by using local wild clay and wood firing technique. We named our pottery as "Touya" when we started our small pottery studio in Shigaraki, Japan, and it literary means "pottery house" in Japanese which we really like.

GTP_KamaFront.jpg

Blog

 

 

Wood firing, Feb 2016

Hitomi Shibata

Normally February is a month we stay home, work on paper, website and making plan for spring because our studio get too cold to making pots, but sometimes, we have to do.

This year, we started making large jars in mid January. On cold nights, we burned lots of fire wood in the wood stove, and wrapped our pots by bubble wraps, blankets and thick plastics to keep away from freeze. In this way, pots are spoiled and get dry slowly. 

Also, fire wood matter is very important for winter wood firing. It takes long time to dry in winter season, so that we purchased oak and pine strips in new year and started cutting & stacking under the shed day by day in whole January. Even so, fired woods are not dry enough. 

When we got ice storm in the middle of Feb, we started glazing pots and loading kiln. I have never had such an experience that glazes, wadding and kiln wash froze very quickly so we had to warm them up time after time. Our fingers lost sense by ice then we had to do same thing for our hands, too. Just wonder how potters in cold climate deal with cold weather. 

Firing this time took longer than usual because fire woods were not dry enough. Oak wood didn't want to burn fast. We ended up to spend 6 hours of gas preheating then 38 hours wood firing. It was almost two times longer than the fastest wood firing we had in the past. 

Another new experience, we tried to cool down kiln faster than normal. We finished firing on Wednesday afternoon, and unloaded kiln on Friday morning. Result was interesting. Had good reduction, lots of ash on our pottery, and lots of nice clay tests.


Japanese Teapots

Hitomi Shibata

Japanese Teapots (Kyusu, 急須) are very special tablewares for Japanese potters. It has more complicated design, process, and function. Also it's more time consuming work than other tablewares. But if you want good green tea, you need good teapots.

First, teapot bodies and lids. Those have to match and fit perfectly.

First, teapot bodies and lids. Those have to match and fit perfectly.

Then spouts and handles. 

Then spouts and handles. 

Assembling. It takes 15-20 minute for me to do.

Assembling. It takes 15-20 minute for me to do.

There is four parts  to make one teapot. Strainer part has many holes. 

There is four parts  to make one teapot. Strainer part has many holes. 

Finish assembling. Phew.

Finish assembling. Phew.

Angles of spouts and handles are the key to make good teapots.

Angles of spouts and handles are the key to make good teapots.

After slip application, they dry slowly.

After slip application, they dry slowly.

Wood firing

Wood firing

Wood fired teapots are not easy because of many risks on the process. I see good and bad always, but it's a lot of fun, good training and big challenge to make teapots.

Wood fired teapots are not easy because of many risks on the process. I see good and bad always, but it's a lot of fun, good training and big challenge to make teapots.